OPTAHEAT infrared preformed thermoplastic heater

  • Adjustable heat
  • Full infrared surface designed to minimize cold spots
  • Heating area with two separate zones for independent operations
  • Lifting winch for heater positioning and easy lifting
  • QL2 Pro Heat Gun attachment option                                                

Infrared heater designed for the application of preformed thermoplastic

OPTAHEAT infrared heater is designed for the application of preformed thermoplastic. OPTAHEAT application equipment has two separate heat zones that can be independently operated and lit. The venturi design uses the pressurized gas from the tanks and mixes it with air to create a mixture which when ignited from behind the ceramic cloth heats the surface to 1600°F to 1800°F on high setting. This design allows for no direct flame to be utilized, which minimizes potential damage to the preformed thermoplastic.

OPTAHEAT PT 150

OPTAHEAT PT 150 has a 3’ x 3’ heating area with two separate zones for independent operations. The winch mechanism assists with raising and lowering of the heating panels for ease of operation. There is an option to attach a QL2 Pro Heat Gun.  

OPTAHEAT PT 200

OPTAHEAT PT 200 has a 4’ x 3’ heating area with two separate zones for independent operations. The heating panels can be swung open to more efficiently heat wide markings. The heating panels swing out to 18” x 8’. Both heating panels have an attached wheel for stabilization.